Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 73-7
Publication Number: 53-1000242-01
ZONE-1022
73
ZONE-1022
Message
Probable
Cause
Indicates that the effective zone configuration has changed to the name displayed.
Recommended
Action
Verify that this zone configuration change was done on purpose. If the new effective zone configuration
is correct, no action is necessary.
Severity INFO
ZONE-1023
Message
Probable
Cause
Indicates that the switch is retrying the merge operation. This usually occurs if the switch on the other
side of the port is busy.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity INFO
ZONE-1024
Message
Probable
Cause
Indicates that the cfgSave command ran successfully. The <Information message> is "cfgSave
completes successfully."
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [ZONE-1022], <sequence-number>,, INFO, <system-name>,
The effective configuration has changed to <Effective configuration
name>. <AD Id>
<timestamp>, [ZONE-1023], <sequence-number>,, INFO, <system-name>,
Switch connected to port (<port number>) is busy. Retry zone merge
<timestamp>, [ZONE-1024], <sequence-number>,, INFO, <system-name>,
<Information message>