Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 77-1
Publication Number: 53-1000242-01
Chapter
77
AUDIT SEC System Messages
SEC-3001
Message
Probable
Cause
Indicates that the security mode of the fabric was either enabled or disabled.
Recommended
Action
Verify that the security mode change was planned. If the security mode change was planned, no action
is required. If the security mode change was not planned, take appropriate action as defined by your
enterprise security policy.
Severity INFO
SEC-3002
Message
Probable
Cause
Indicates that the specified security event has occurred. The Event Name can be one of the following:
• There has been an FCS failover.
• A security policy has been activated.
• A security policy has been saved.
• A security policy has been aborted.
• A non-FCS password has changed.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
AUDIT, <timestamp>, [SEC-3001], INFO, SECURITY, <event-initiator-
details>, <event-location>, , Event: <Event Name>, Status: success,
Info: Security mode <State change: Enabled or Disabled> on the
fabric.
AUDIT, <timestamp>, [SEC-3002], INFO, SECURITY, <event-initiator-
details>, <event-location>, , Event: <Event Name>, Status: success,
Info: <Event Related Info>.