Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 79-3
Publication Number: 53-1000242-01
SULB-1009
79
"firmwareDownload failed due to IPC error." 0x50
"Unable to check the firmware version on Standby CP due to IPC error." 0x51
"firmwareDownload failed due to IPC error." 0x52
"firmwareDownload failed due to IPC error." 0x53
"Standby CP failed to reboot due to IPC error." 0x54
"firmwareCommit operation failed due to IPC error." 0x55
"Unable to check the firmware version on Standby CP due to IPC error." 0x56
"Unable to restore the original firmware due to Standby CP timeout." 0x57
"Standby CP failed to reboot and was not responding." 0x58
"Unable to check the firmware version on Standby CP due to IPC error." 0x59
"Sanity check failed because firmwareDownload is already in progress." 0x60
"Sanity check failed because firmwareDownload is already in progress." 0x61
NOT USED 0x62
"System Error." 0x63
"Active CP forced failover succeeded. Now this CP becomes Active." 0x64
"Standby CP booted up." 0x65
"Active and Standby CP failed to gain HA synchronization within 10 minutes." 0x66
"Standby rebooted successfully." 0x67
"Standby failed to reboot." 0x68
"firmwareCommit has started to restore the secondary partition." 0x69
"Local CP is restoring its secondary partition." 0x6a
"Unable to restore the secondary partition. Please use firmwareDownloadStatus
and firmwareShow to see firmware status."
0x6b
"firmwareDownload has started on Standby CP. It might take up to 10 minutes." 0x6c
"firmwareDownload has completed successfully on Standby CP." 0x6d
"Standby CP reboots." 0x6e
"Standby CP failed to boot up." 0x6f
"Standby CP booted up with new firmware." 0x70
"Standby CP failed to boot up with new firmware." 0x71
"firmwareDownload has completed successfully on Standby CP." 0x72
"firmwareDownload has started on Standby CP. It might take up to 10 minutes." 0x73
"firmwareDownload has completed successfully on Standby CP." 0x74
"Standby CP reboots." 0x75
"Standby CP failed to reboot." 0x76
Status Message Status Code