Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

1-6 Fabric OS Message Reference

Publication Number: 53-1000242-01

Viewing and Configuring System Message Logs

Viewing System Messages from Web Tools

This procedure is valid for the SilkWorm 200E, 3016, 3250, 3850, 3900, 4100, 24000, and 48000.

To view the system message log for a switch from Web Tools:

1. Launch Web Tools.

2. Select the desired switch from the Fabric Tree. The Switch View displays.

3. Click the Switch Events button. A Switch Events Report displays.

4. View the switch events and messages.

In dual-domain switches, an Event button exists for each logical switch. Only messages relating to

that switch (and chassis) will be displayed.

Dumping System Messages

This procedure is valid for the SilkWorm 200E, 3016, 3250, 3850, 3900, 4100, 24000, and 48000.

To display the system message log, with no page breaks:

1. Log in to the switch as admin.

2. Enter the errDump command at the command line:

switch:admin> errDump

Version: 5.0.1

2004/07/28-17:04:59, [FSSM-1002], 1,, INFO, switch, HA State is in sync

2004/07/28-17:04:59, [FSSM-1003], 2,, WARNING, switch, HA State out of sync

2004/07/28-17:04:51, [EM-1055], 3,, WARNING, switch, Media 27: Port media

incompatible. Reason: Configured port speed.

2004/07/28-17:04:54, [FABR-1001], 4,, WARNING, switch, port 4, ELP rejected

by the other switch

2004/07/28-17:05:06, [FW-1050], 5,, WARNING, switch, Sfp Supply Voltage 0,

is below low boundary(High=3600, Low=3150). Current value is 0 mV.

switch:admin>