Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

2-4 Fabric OS Message Reference
Publication Number: 53-1000242-01
AUTH-1011
2
Probable
Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
AUTH-1011
Message
Probable
Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
switchEnable commands.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
AUTH-1012
Message
Probable
Cause
Indicates that an authentication is rejected because the remote entity does not support authentication.
Recommended
Action
Make sure the entity at the other end of the link supports authentication.
Severity WAR NIN G
<timestamp>, [AUTH-1011], <sequence-number>,, WARNING, <system-
name>, Failed to register for failover operation: switch <switch
number> error <error code>
<timestamp>, [AUTH-1012], <sequence-number>,, WARNING, <system-
name>, Authentication <code> is rejected: port <port number>
explain <explain code> reason <reason code>