Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 37
53-1002448-01
AG-1007
2
AG-1007
Message <timestamp>, [AG-1007], <sequence-number>,, WARNING, <system-name>, FLOGI
response not received for the N_Port <port> connected to the fabric.
Probable Cause Indicates the N_Port connected to the fabric switch is not online. The specified N_Port has been
disabled.
Recommended
Action
Check the connectivity between the Access Gateway N_Port and the fabric switch port.
Severity WARNING
AG-1008
Message <timestamp>, [AG-1008], <sequence-number>,, WARNING, <system-name>, Invalid port
login (PLOGI) response from the fabric on the N_Port <port>.
Probable Cause Indicates that the fabric switch management server did not accept the N_Port Login (PLOGI)
request sent by the Access Gateway.
Recommended
Action
Check the configuration of the fabric switch connected to the Access Gateway.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
Severity WARNING
AG-1009
Message <timestamp>, [AG-1009], <sequence-number>,, WARNING, <system-name>, Sending FLOGI
failed on N_Port <port>.
Probable Cause Indicates there was a failure sending a Fabric Login (FLOGI) request from the Access Gateway to
the fabric switch.
Recommended
Action
Check the configuration of the fabric switch connected to the Access Gateway.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
AG-1010
Message <timestamp>, [AG-1010], <sequence-number>,, WARNING, <system-name>, Sending PLOGI
failed on N_Port <port>.
Probable Cause Indicates there was a failure sending an N_Port Login (PLOGI) request from the Access Gateway to
the fabric switch.