Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

40 Fabric OS Message Reference
53-1002448-01
AG-1018
2
Recommended
Action
Execute the switchShow command to display the status of all ports in the system. Execute the
portCfgShow command to display the list of ports currently configured as N_Ports.
Severity WARNING
AG-1018
Message <timestamp>, [AG-1018], <sequence-number>,, ERROR, <system-name>, Host port
should not be connected to port <port>, which is configured as N_Port.
Probable Cause Indicates that an Initiator or Target is erroneously connected to a port configured for N_Port
operation.
Recommended
Action
Execute the switchShow command to display the status of all ports in the system. Execute the
portCfgShow command to display the list of ports currently configured as N_Ports. Make sure that
the host is connected to an F_port.
Severity ERROR
AG-1019
Message <timestamp>, [AG-1019], <sequence-number>,, WARNING, <system-name>, Unable to
failover N_Port <port>. No other N_Port in port group:<pgid> is online.
Probable Cause Indicates that failover across port groups is not supported.
Recommended
Action
Check whether an alternate N_Port is configured in this port group.
Severity WARNING
AG-1020
Message <timestamp>, [AG-1020], <sequence-number>,, INFO, <system-name>, F_Ports to
N_Ports route/mapping has been changed.
Probable Cause Indicates that F_Port -to-N_Port mapping has been changed because the switch has come online
or some new N_Port or F_Port has come online.
Recommended
Action
Execute the ag
--mapshow command to display the updated F_Port-to-N_Port mapping.
Severity INFO