Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 41
53-1002448-01
AG-1021
2
AG-1021
Message <timestamp>, [AG-1021], <sequence-number>,, WARNING, <system-name>, Unable to do
Preferred-Failover of F_Port <port>. Failover across different fabric is not
supported.
Probable Cause Indicates that failover across N_Ports connected to different fabrics is not supported.
Recommended
Action
Change the preferred N_Port settings for this F_Port using the ag
--prefset command.
Choose the preferred N_Port such that it is in the same fabric as the primary N_Port of this F_Port.
Execute the ag
--show command to check the fabric connectivity of the N_Ports.
Severity WARNING
AG-1022
Message <timestamp>, [AG-1022], <sequence-number>,, INFO, <system-name>, F_Port <fport>
is failed over to its preferred N_Port <nport>.
Probable Cause Indicates the specified F_Port is failing over to its preferred N_Port.
Recommended
Action
Execute the ag
--mapshow command to display the updated F_Port-to-N_Port mapping.
Severity INFO
AG-1023
Message <timestamp>, [AG-1023], <sequence-number>,, INFO, <system-name>, F_Port <fport>
mapped to offline N_Port <nport> is failed over to its preferred N_Port <pport>.
Probable Cause Indicates the specified N_Port has failed to come online. The F_Port mapped to this N_Port had its
preferred set and is online.
Recommended
Action
Execute the ag
--mapshow command to display updated F_Port -to -N_Port mapping.
Severity INFO
AG-1024
Message <timestamp>, [AG-1024], <sequence-number>,, INFO, <system-name>, F_Port <fport>
is failed back to its preferred N_Port <nport>.
Probable Cause Indicates the specified N_Port is failing back F_Ports, which are failed over to some other N_Port.