Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 43
53-1002448-01
AG-1028
2
AG-1028
Message <timestamp>, [AG-1028], <sequence-number>,, WARNING, <system-name>, Device with
Port WWN <port_name> tried to perform fabric login through port <fport>, without
having access permission.
Probable Cause Indicates the device does not have login access for that port, as per Advanced Device Security
(ADS) policy set by the user.
Recommended
Action
Add the device to the ADS allow list for the specified port using the ag
--adsadd command.
Severity WARNING
AG-1029
Message <timestamp>, [AG-1029], <sequence-number>,, WARNING, <system-name>, Port Group
<pgid> has ports going to different fabrics.
Probable Cause Indicates a misconfiguration.
Recommended
Action
Connect all ports in the port group to the same fabric.
Severity WARNING
AG-1030
Message <timestamp>, [AG-1030], <sequence-number>,, WARNING, <system-name>, N_Port ID:
<port> has been determined to be unreliable.
Probable Cause Indicates that the port goes online and offline often and therefore the port is marked as unreliable.
After a certain interval of time, if the port toggling remains within the threshold limit, the port will be
marked as reliable.
Recommended
Action
No action is required.
Severity WARNING
AG-1031
Message <timestamp>, [AG-1031], <sequence-number>,, WARNING, <system-name>, Loop Detected
for device with Port WWN <port> connected to port <port_name>
Probable Cause Indicates that the routing loop is detected for the device connected to the port.