Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 45
53-1002448-01
AG-1036
2
Recommended
Action
No action is required.
Severity INFO
AG-1036
Message <timestamp>, [AG-1036], <sequence-number>,, WARNING, <system-name>,Port <port> is
connected to a Non-Brocade fabric with Persistent ALPA enabled. Check the admin
guide for supported configuration.
Probable Cause Indicates that one of the ports is connected to a non-Brocade fabric.
Recommended
Action
No action is required.
Severity WARNING
AG-1037
Message <timestamp>, [AG-1037], <sequence-number>,, INFO, <system-name>,Trunked N_Port
(<nport>) going offline, if switchshow CLI for the connected fabric switch port
displays “Persistently disabled: Area has been acquired”, then check cabling: all
trunked ports should be in same ASIC Port Group.
Probable Cause Indicates that the cabling is incorrect.
Recommended
Action
If the switchshow command on the connected fabric switch port displays “Persistently disabled:
Area has been acquired”, then check the cabling on the Access Gateway. All trunked ports in a
single trunk should belong to the same application-specific integrated circuit (ASIC) port group.
Severity INFO
AG-1038
Message <timestamp>, [AG-1038], <sequence-number>,, ERROR, <system-name>,Elara Ports
going to different fabrics, check N_Port <nport>.
Probable Cause Indicates a misconfiguration.
Recommended
Action
Connect all ports in the port group to the same fabric.
Severity ERROR