Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

52 Fabric OS Message Reference
53-1002448-01
ANV-1004
4
ANV-1004
Message <timestamp>, [ANV-1004], <sequence-number>,, ERROR, <switch-name>, S<slot
number>,C<chip index>: Invalid DMA ch pointer, chan:<Channel number>,
good_addr:0x<Good address> bad_addr:0x<Bad address>.
Probable Cause Indicates an internal error in the ASIC hardware that may degrade the data traffic.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the faulted
blade.
Severity ERROR
ANV-1005
Message <timestamp>, [ANV-1005], <sequence-number>,, ERROR, <switch-name>, S<slot
number>,C<chip index>,A<anvil id>: Memory allocation failed.
Probable Cause Indicates memory allocation failure in the software.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the switch or
contact your switch service provider.
Severity ERROR
ANV-1006
Message <timestamp>, [ANV-1006], <sequence-number>,, CRITICAL, <switch-name>, S<slot
number>,C<chip index>: HW ASIC Chip fault. Type = 0x<chip error type>, Error =
<chip error string>.
Probable Cause Indicates an internal error in the ASIC hardware that renders the chip as not operational.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the faulted
blade.
Severity CRITICAL
ANV-1007
Message <timestamp>, [ANV-1007], <sequence-number>,, CRITICAL, <switch-name>, S<slot
number>,C<chip index>: ANVIL PASS 1 low buff pool fault: <chip regval field>
0x<chip error type>.
Probable Cause Indicates that Anvil Pass 1 is running out of free buffers, which may cause chip fault.
Recommended
Action
Power cycle the faulted blade. If the problem persists, replace the faulted blade.
Severity CRITICAL