Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 53
53-1002448-01
ANV-1008
4
ANV-1008
Message <timestamp>, [ANV-1008], <sequence-number>,, ERROR, <switch-name>, S<slot
number>, C<chip index>: MAC-VID classifier table is full. No space for new entry.
Probable Cause Indicates that the Media Access Control (MAC) VLAN ID (VID) classifier table is full and no more
entries can be added.
Recommended
Action
Delete some of the existing unused rules using the portcfg arp command and then add new
entries.
Severity ERROR
ANV-1015
Message <timestamp>, [ANV-1015], <sequence-number>,, WARNING, <switch-name>, Port
reinitialized due to Link Reset failure on internal port S<slot number>, P<port
number>(<blade port number>).
Probable Cause Indicates that the specified port was reinitialized due to link reset failure.
Recommended
Action
Power cycle the faulted blade. If the problem persists, replace the faulted blade.
Severity WARNING
ANV-1016
Message <timestamp>, [ANV-1016], <sequence-number>,, WARNING, <switch-name>, Port is
faulted due to port reinitialization failure on internal port S<slot number>,
P<port number>(<blade port number>) with reason <port fault reason>.
Probable Cause Indicates that the specified port is faulted due to port reinitialization failure.
Recommended
Action
Power cycle the faulted blade. If the problem persists, replace the faulted blade.
Severity WARNING