Manualshelf

Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit
151152153154155156157158159160
Fabric OS Message Reference 69
53-1002448-01
Chapter
6
BKSW System Messages
BKSW-1003
Message <timestamp>, [BKSW-1003], <sequence-number>, FFDC, WARNING, <system-name>, kSWD:
<Warning message>.
Probable Cause Indicates a warning state within the system.
A critical application error was reported in the watchdog subsystem. This message is used to
convey information regarding the state of the system. Refer to the Warning message variable for
specific information. The switch will reboot (on single-CP switches) or fail over (on dual-CP
switches).
The Warning message variable will be one of the following:
• Detected unexpected termination of: daemon name
One of the critical daemons ended unexpectedly.
• daemon name failed to refresh SWD*** Sending SIGABRT to PID process id number
One of the critical daemons is found to be nonresponsive; sending signal abort (SIGABRT).
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.
Severity WARNING