Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

82 Fabric OS Message Reference
53-1002448-01
BL-1035
7
Recommended
Action
No action is required.
Severity INFO
BL-1035
Message <timestamp>, [BL-1035], <sequence-number>,, INFO, <system-name>, Slot <slot
number> iSCSI port <iscsi port number> Initialization completed.
Probable Cause Indicates that the slot has completed initializing the specified iSCSI port.
Recommended
Action
No action is required.
Severity INFO
BL-1036
Message <timestamp>, [BL-1036], <sequence-number>,, CRITICAL, <system-name>, Faulting 8G
blade in slot = <slot number> due to incompatible stag mode. All EX/VEX ports must
be disabled in order to enable the 8G blade in the chassis.
Probable Cause Indicates that the FOS 6.0, 8G blade with legacy mode (EX_port having stag) will be disabled.
Recommended
Action
Disable all EX/VEX ports and perform a slotpoweroff or slotpoweron operation on the 8G blade.
Also, all EX/VEX ports can be re-enabled now.
Severity CRITICAL
BL-1037
Message <timestamp>, [BL-1037], <sequence-number>,, CRITICAL, <system-name>, Faulting
chip in slot = <slot number>, miniS = <miniS number>, port = <port number> due to
BE/BI port fault.
Probable Cause Indicates a fault on the chip and that all ports on the chip have been disabled.
Recommended
Action
No action is required.
Severity CRITICAL
BL-1038
Message <timestamp>, [BL-1038], <sequence-number>,, CRITICAL, <system-name>, Inconsistent
FPGA image version detected, please reboot the switch for recovery.
Probable Cause Indicates that the FPGA image version is incompatible with the software version.