Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 89
53-1002448-01
Chapter
9
BLS System Messages
BLS-1000
Message <timestamp>, [BLS-1000], <sequence-number>, FFDC, ERROR, <system-name>, <command
name> of GE <port number> failed. Please retry the command. Data: inst=<ASIC
instance> st=<ASIC initializing state> rsn=<reason code> fn=<message function>
oid=<ASIC ID>.
Probable Cause Indicates that the hardware is not responding to a command request, possibly because it is busy.
Recommended
Action
Retry the command.
Severity ERROR
BLS-1001
Message <timestamp>, [BLS-1001], <sequence-number>, FFDC, CRITICAL, <system-name>, FIPS
<FIPS Test Name> failed; algo=<algorithm code> type=<algorithm type> slot=<Slot
Number>.
Probable Cause Indicates that a FIPS failure has occurred and requires faulting the blade or switch.
Recommended
Action
Retry the command.
Severity CRITICAL
BLS-1002
Message <timestamp>, [BLS-1002], <sequence-number>, INFO, <system-name>, An IPsec/IKE
policy was added.
Probable Cause Indicates that an IPsec or IKE policy was added and the configuration file was updated.
Recommended
Action
No action is required.
Severity INFO