Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

116 Fabric OS Message Reference
53-1002448-01
CDR-1004
15
CDR-1004
Message <timestamp>, [CDR-1004], <sequence-number>, ERROR, <system-name>, S<slot number>,
C<chip index>: Invalid DMA ch pointer, chan:<Channel number>, good_addr:0x<Good
address>, bad_addr:0x<Bad address>.
Probable Cause Indicates an internal error in the Application Specific Integrated Circuit (ASIC) hardware that may
degrade data traffic.
Recommended
Action
Whenever this error occurs, restart the system at the next maintenance window. If the problem
persists, replace the blade.
Severity ERROR
CDR-1005
Message <timestamp>, [CDR-1005], <sequence-number>,, WARNING, <system-name>, S<slot
number>, P<port number>(<blade port number>): best effort QOS will be turned off
at next port state change as it is not supported under this configuration.
Probable Cause Indicates QoS will be turned off automatically at the next port state change because best effort is
no longer supported on a 4G platform or 8G platform long distance port.
Recommended
Action
No action is required.
Severity WARNING
CDR-1006
Message <timestamp>, [CDR-1006], <sequence-number>,, WARNING, <system-name>, S<slot
number>, P<port number>(<blade port number>): QOS overwrites portcfglongdistance
vc_translation_link_init. ARB will be used on the link.
Probable Cause Indicates QoS overwrites the portcfglongdistance vc_translation_link_init 0 choice. ARB will be
used on the link.
Recommended
Action
No action is required.
Severity WARNING
CDR-1007
Message <timestamp>, [CDR-1007], <sequence-number>,, WARNING, <system-name>, S<slot
number>,C<chip index>: Internal link errors have been reported, no hardware faults
identified, continuing to monitor for errors: flt1:<fault1_cnt>,
flt2:<fault2_cnt> thresh1:0x<threshold_used>.
Probable Cause Indicates some errors found in hardware that may or may not impact data traffic.