Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 147
53-1002448-01
CONF-1030
19
CONF-1030
Message <timestamp>, [CONF-1030], <sequence-number>,, WARNING, <system-name>,
Configuration database full, data not committed (key:<Key of failed configuration
data>.
Probable Cause Indicates that the previous configuration commands have resulted in a database full condition.
Configuration changes associated with the specified key have not been applied.
Recommended
Action
Use the configure command and various other commands to erase configuration parameters that
are no longer required. As a last resort, execute the configDefault command and reconfigure the
system.
Severity WARNING
CONF-1031
Message <timestamp>, [CONF-1031], <sequence-number>,, INFO, <system-name>, configDefault
completed successfully <Message>.
Probable Cause Indicates that the configDefault command was initiated and completed successfully.
Recommended
Action
No action is required.
Severity INFO
CONF-1032
Message <timestamp>, [CONF-1032], <sequence-number>,, INFO, <system-name>, configRemove
completed successfully <Message>.
Probable Cause Indicates that the configRemove command was initiated and completed successfully.
Recommended
Action
No action is required.
Severity INFO
CONF-1040
Message <timestamp>, [CONF-1040], <sequence-number>,, INFO, <system-name>, configDefault
failed. <Message>.
Probable Cause Indicates that an error occurred while executing the configDefault command.
Recommended
Action
Execute the errShow command to view the error log. Correct the error and execute the
configDefault command again.
Severity INFO