Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

196 Fabric OS Message Reference
53-1002448-01
EM-1066
25
Recommended
Action
Upgrade the Fabric OS firmware or the SAS firmware using the firmwareDownload command. Refer
to the release notes for a compatible version of firmware.
Severity WARNING
EM-1066
Message <timestamp>, [EM-1066], <sequence-number>,, INFO, <system-name>, SAS
Virtualization Services are now available <Slot number or blank for single board
systems>.
Probable Cause Indicates that the previously incompatible Fabric OS or Storage Application Services (SAS) firmware
has been upgraded and is now compatible.
Recommended
Action
No action is required.
Severity INFO
EM-1067
Message <timestamp>, [EM-1067], <sequence-number>,, WARNING, <system-name>, Stopping
synchronization of the system due to <version> incompatibility with standby CP.
Probable Cause Indicates that the software version on the standby CP is incompatible with this software feature
enabled on this Fabric OS firmware version.
Recommended
Action
Upgrade the software on the standby CP or disable the software feature on this CP.
To disable the Ethernet switch service, execute the fosconfig
--disable ethsw command.
To view the buffer optimization mode for the slots execute the bufopmod
--showall command, and
then execute the bufopmode
--reset slot command to disable the feature for those slots before
downgrading.
To disable FC8-16 serdes tuning mode, execute the serdestunemode
--reset command.
Severity WARNING
EM-1068
Message <timestamp>, [EM-1068], <sequence-number>, FFDC, ERROR, <system-name>, High
Availability Service Management subsystem failed to respond. A required component
is not operating.
Probable Cause Indicates that the High Availability (HA) subsystem has not returned a response within four minutes
of the request from the environmental monitor (EM). It usually indicates that some component has
not started properly or has terminated. The specific component that has failed may be indicated in
other messages or debug data. There are serious internal Fabric OS configuration or hardware
problems on the switch.