Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 221

53-1002448-01

FABR-1044

Message <timestamp>, [FABR-1044], <sequence-number>, ERROR, <system-name>, Detected

Fabric ID conflict with neighbor switch <Switchname> (domain <Domain ID>), FID

<Fabric ID>. E-ports (<Number of E-ports disabled>) connected to the switch are

disabled.

Probable Cause Indicates that the neighbor switch has a Fabric ID conflict with the local switch. All E_ports directly

connected to the conflicting switch are disabled.

Recommended

Action

Make sure that all the switches in the fabric have the same fabric ID or upgrade the switch

firmware to a VF-capable firmware.

Severity ERROR

FABR-1045

Message <timestamp>, [FABR-1045], <sequence-number>, ERROR, <system-name>, Detected Base

Switch conflict with remote (not neighbor) switch <Switchname> (domain <Domain

ID>), BS <Base Switch Mode>. No local E-ports disabled.

Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. But no

ports are disabled because the remote switch is not adjacent to the local switch.

Recommended

Action

Make sure that all the switches in the fabric have the same Base Switch attribute or disable VF

mode for the conflicting switch using the fosconfig command.

Severity ERROR

FABR-1046

Message <timestamp>, [FABR-1046], <sequence-number>, ERROR, <system-name>, Detected Base

Switch conflict with neighbor switch <Switchname> (domain <Domain ID>), BS <Base

Switch Mode>. E-ports (<Number of E-ports disabled>) connected to the switch are

disabled.

Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. All the

E_ports directly connected to the conflicting switch are disabled.

Recommended

Action

Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the

switch firmware to a VF-capable firmware.

Severity ERROR