Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 269
53-1002448-01
FCR-1064
37
FCR-1064
Message <timestamp>, [FCR-1064], <sequence-number>,, ERROR, <system-name>, Fabric ID of
backbone FC-Routers mismatch or overlap.
Probable Cause Indicates that either (1) a backbone fabric split and both are connected to common edge fabrics, or
(2) the fabric IDs of two backbone fabrics connected to an edge fabric are the same.
Recommended
Action
If the backbone fabric split, merge the fabrics.
If two (or more) backbone fabrics have the same IDs, make the fabric IDs unique using fcrConfigure
command.
Severity ERROR
FCR-1065
Message <timestamp>, [FCR-1065], <sequence-number>,, ERROR, <system-name>, Fabric on port
<port number> was assigned two different fabric IDs.
Probable Cause Indicates that another port on the switch is connected to the same edge fabric with a different
fabric ID assignment.
Recommended
Action
Change the port fabric ID to same value as the other ports connected to the edge fabric using the
portCfgExport or portCfgVexport commands.
Severity ERROR
FCR-1066
Message <timestamp>, [FCR-1066], <sequence-number>,, ERROR, <system-name>, Fabric on port
<port number> has the same fabric ID as another fabric.
Probable Cause Indicates that either the fabric split, or there is another fabric (possibly the backbone) that has the
same fabric ID as the fabric connected to the specified port.
Recommended
Action
If the fabric split, then merge the fabrics and manually re-enable the port.
If there is another fabric with the same ID, change the fabric ID for the port using the portCfgExport
or portCfgVExport commands.
Severity ERROR
FCR-1067
Message <timestamp>, [FCR-1067], <sequence-number>,, WARNING, <system-name>, Zone
configurations, total LSAN zones and aliases, exceeded on port <port number> by
<overflow> entries; max entries: <LSAN zone limit>.
Probable Cause Indicates that the total number of zone configurations created in the connected fabric exceeds the
maximum number supported by the Fibre Channel.