Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 273
53-1002448-01
FCR-1078
37
Recommended
Action
Ensure that the M-Model switch has the same currently configured details such as front port
domain ID and WWN of the EX_Port on which this operation was attempted.
Severity WARNING
FCR-1078
Message <timestamp>, [FCR-1078], <sequence-number>,, WARNING, <system-name>, LSAN name
<LSAN name> is too long. It is dropped.
Probable Cause Indicates that the length of the LSAN name exceeds the limit of 64 characters.
Recommended
Action
Change the name and reactivate the zone database.
Severity WARNING
FCR-1079
Message <timestamp>, [FCR-1079], <sequence-number>,, WARNING, <system-name>, Domain
<Domain> has conflict matrix database with local domain.
Probable Cause Indicates that the specified domain has a different matrix database from the local domain.
Recommended
Action
Change the matrix database.
Severity WARNING
FCR-1080
Message <timestamp>, [FCR-1080], <sequence-number>,, WARNING, <system-name>, The pause
response timer for domain <Domain> expired.
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has not responded to
the pause message which prevented the protocol from completing. Any data traffic disruption
observed during the firmware download may have been due to the result of the rejected pause
message.
Recommended
Action
No action is required.
Severity WARNING