Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

274 Fabric OS Message Reference
53-1002448-01
FCR-1081
37
FCR-1081
Message <timestamp>, [FCR-1081], <sequence-number>,, WARNING, <system-name>, The pause
message is rejected by the domain <Domain>.
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the
pause message which prevented the protocol from completing. Any data traffic disruption observed
during the firmware download may have been due to the rejected pause message.
Recommended
Action
No action is required.
Severity WARNING
FCR-1082
Message <timestamp>, [FCR-1082], <sequence-number>,, WARNING, <system-name>, The pause
retry count is exhausted for the domain <Domain>.
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the
pause message which prevented the protocol from completing. Any data traffic disruption observed
during the firmware download may have been due to this issue.
Recommended
Action
No action is required.
Severity WARNING
FCR-1083
Message <timestamp>, [FCR-1083], <sequence-number>,, WARNING, <system-name>, The resume
message is rejected by the domain <Domain>.
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the
pause message which prevented the protocol from completing. Any data traffic disruption observed
during the firmware download may have been due to the rejected resume message.
Recommended
Action
No action is required.
Severity WARNING
FCR-1084
Message <timestamp>, [FCR-1084], <sequence-number>,, WARNING, <system-name>, The resume
retry count is exhausted for the domain <Domain>.
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the
resume message which prevented the protocol from completing. Any data traffic disruption
observed during the firmware download may have been due to this issue.