Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 275
53-1002448-01
FCR-1085
37
Recommended
Action
No action is required.
Severity WARNING
FCR-1085
Message <timestamp>, [FCR-1085], <sequence-number>,, ERROR, <system-name>, HA sync lost
as remote CP does not support FCR based matrix.
Probable Cause Indicates that the remote control processor (CP) has earlier firmware, which does not support the
FCR- based matrix while the local CP has the feature enabled. This is causing the loss of the
high-availability (HA) synchronization.
Recommended
Action
Disable FCR-based matrix or upgrade the remote CP.
Severity ERROR
FCR-1086
Message <timestamp>, [FCR-1086], <sequence-number>,, ERROR, <system-name>, HA sync lost
as remote CP does not support Condor2 based EX_ports.
Probable Cause Indicates that the remote control processor (CP) has older firmware, which does not support
Condor-based EX_ port. This is causing the loss of the high-availability (HA) synchronization.
Recommended
Action
Disable Condor2-based EX_ports or upgrade the remote CP.
Severity ERROR
FCR-1087
Message <timestamp>, [FCR-1087], <sequence-number>,, ERROR, <system-name>, ExPort
<ExPort> connects to fabric <fabric> with capability to use XISL domain <domain>.
Probable Cause Indicates that the EX_Port connects to logical fabric containing a domain has the capability to use
XISL.
Recommended
Action
Disable the ‘Allow to use XISL’ mode of the domain by using the configure command.
Severity ERROR