Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 285
53-1002448-01
FICN-1020
38
Recommended
Action
If there was a job failure associated with this event, contact your switch service provider.
Severity ERROR
FICN-1020
Message <timestamp>, [FICN-1020], <sequence-number>,, WARNING, <system-name>,
DevTapeEgr:FICON Cancel received Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for the device> tflags=0x<the current emulation tape control flags for the
device> sflags=0x<the current emulation status control flags for the device>.
Probable Cause Indicates that the FICON channel issued a Cancel sequence for a device in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your switch service
provider.
Severity WARNING
FICN-1021
Message <timestamp>, [FICN-1021], <sequence-number>,, WARNING, <system-name>,
DevTapeEgr:FICON Tape Cancel:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the current SIO
time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Probable Cause Indicates that the FICON channel issued a Cancel sequence for a device in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your switch service
provider.
Severity WARNING
FICN-1022
Message <timestamp>, [FICN-1022], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> State=0x<the current state of
the device that received the selective reset> statArray=0x<the last 4 status
values received from the device> cmdArray=0x<the last 4 commands that were issued
to the device> tflags=0x<the current emulation tape control flags for the device>
sflags=0x<the current emulation status control flags for the device>.
Probable Cause Indicates that the FICON channel issued a Selective Reset for a device that was active in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your switch service
provider.
Severity ERROR