Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

300 Fabric OS Message Reference
53-1002448-01
FICN-1069
38
Recommended
Action
If there were associated IO errors at the same time as this event, contact your vendor's customer
support for assistance.
Severity ERROR
FICN-1069
Message <timestamp>, [FICN-1069], <sequence-number>,, ERROR, <system-name>, Emulation
Configuration Error on TunnelId <Tunnel ID>.
Probable Cause Indicates an error has been noted in the FICON configuration. Refer to the string for the nature of
the configuration issue.
Recommended
Action
If resolution of the configuration issue cannot be completed, contact your vendor's customer
support for assistance.
Severity ERROR
FICN-1070
Message <timestamp>, [FICN-1070], <sequence-number>,, INFO, <system-name>,
DevTapeIngr:Exceptional Status rcvd on Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> state=0x<current emulation
state> status=0x<the exceptional status value>.
Probable Cause Indicates the normal end of tape status (0x0D or 0x05) is received from the device or error status
(including Unit Check 0x02) is received from an active emulation device.
Recommended
Action
The end of tape is a normal event during pipelining and not the unit check. If there are associated
IO error messages with this event, contact your vendor's customer support for assistance.
Severity INFO
FICN-1071
Message <timestamp>, [FICN-1071], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:Tape Loaded on Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>.
Probable Cause Indicates the tape IOs are processed from a locally connected LPAR, which indicates that a tape is
loaded on a device.
Recommended
Action
No action is required.
Severity INFO