Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 305
53-1002448-01
FICN-1083
38
FICN-1083
Message <timestamp>, [FICN-1083], <sequence-number>,, WARNING, <system-name>,
EmulEls:SW_RSCN received on GEPort=<GEPortNumber> VEPort=<VEPortNumber>
Domain=0x<Domain> Port=0x<Port Host/Device Side>.
Probable Cause Indicates an attached port with the established FICON emulated path has logged out from the
switch.
Recommended
Action
This may be an unexpected event, contact your vendor's customer support for assistance.
Severity WARNING
FICN-1084
Message <timestamp>, [FICN-1084], <sequence-number>,, ERROR, <system-name>, fcFicInit: No
DRAM2 memory available, FICON emulation is disabled.
Probable Cause Indicates a faulty DRAM2 was detected and access to its address range is prohibited.
Recommended
Action
This is an unexpected event, contact your vendor's customer support for assistance.
Severity ERROR
FICN-1085
Message <timestamp>, [FICN-1085], <sequence-number>,, INFO, <system-name>, FICON FCIP
Tunnel is Up on GE<Either GE0 or GE1>,tunnel Id=<The configured tunnel ID (0-7)>.
Probable Cause Indicates a FICON FCIP tunnel has been established successfully to the peer switch.
Recommended
Action
No action is required.
Severity INFO
FICN-1086
Message <timestamp>, [FICN-1086], <sequence-number>,, ERROR, <system-name>, FICON FCIP
Tunnel is Down on GE<Either GE0 or GE1>,tunnel Id=<The configured tunnel ID
(0-7)>.
Probable Cause Indicates a FICON FCIP tunnel to the peer switch has been terminated.
Recommended
Action
This is an unexpected event, contact your vendor's customer support for assistance.
Severity ERROR