Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 311

53-1002448-01

FICN-1102

Message <timestamp>, [FICN-1102], <sequence-number>,, WARNING, <system-name>,

HostTeraIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands

received from the channel for this device> lastStatus=0x<Last 4 status values

presented to the channel for this device> treating as system reset event.

Probable Cause Indicates an LRJ from a FICON channel indicates that the channel believes that it no longer has a

path established to the CU.

Recommended

Action

This is normally an unexpected event; contact your vendor's customer support for assistance.

Severity WARNING

FICN-1103

Message <timestamp>, [FICN-1103], <sequence-number>,, INFO, <system-name>,

DevTeraIngr:Exceptional Status rcvd on Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<current emulation

state> status=0x<the exceptional status value>.

Probable Cause Indicates that the status (0x0D or 0x05) indicating the device is going down was received from the

device or error status (including Unit Check 0x02) is received from an active emulation device.

Recommended

Action

The device going down is a normal event during pipelining and not the unit check. If there are

associated IO error messages with this event, contact your vendor's customer support for

assistance.

Severity INFO

FICN-1104

Message <timestamp>, [FICN-1104], <sequence-number>,, INFO, <system-name>,

DevTeraEgr:Device Ready on Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.

Probable Cause Indicates the Teradata device has been initialized and is ready for emulation operations.

Recommended

Action

No action is required.

Severity INFO