Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

314 Fabric OS Message Reference
53-1002448-01
FICN-1111
38
FICN-1111
Message <timestamp>, [FICN-1111], <sequence-number>,, ERROR, <system-name>,
DevPrintEgr:FICON Purge received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Probable Cause Indicates the FICON channel issued a Purge Path command sequence for a device.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer
support for assistance.
Severity ERROR
FICN-1112
Message <timestamp>, [FICN-1112], <sequence-number>,, WARNING, <system-name>,
DevPrintIng:Auto Sense Data received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Bytes0-0xB=0x<bytes 0-3 of sense
data from the device><bytes 4-7 of sense data from the device><bytes 8-0x0b of
sense data from the device>.
Probable Cause Indicates the FICON Printer write pipelining processed sense data from a FICON device.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer
support for assistance.
Severity WARNING
FICN-1113
Message <timestamp>, [FICN-1113], <sequence-number>,, WARNING, <system-name>,
DevPrintIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Probable Cause Indicates an LRJ from a FICON channel indicates that the channel does not have a path established
to the CU.
Recommended
Action
This is normally an unexpected event, contact your vendor's customer support for assistance.
Severity WARNING