Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

316 Fabric OS Message Reference
53-1002448-01
FICN-1117
38
FICN-1117
Message <timestamp>, [FICN-1117], <sequence-number>,, WARNING, <system-name>,
HostPrintIng:FICON Cancel received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device>.
Probable Cause Indicates a job was cancelled during Print write pipelining.
Recommended
Action
If this was an unexpected event (cancel is normally an operator event), contact your vendor's
customer support for assistance.
Severity WARNING
FICN-1118
Message <timestamp>, [FICN-1118], <sequence-number>,, ERROR, <system-name>,
HostPrintIng::FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device> LastCmds=0x<the last 4 commands received from the channel
for this device> LastStatus=0x<the last 4 status values presented to the channel
for this device>.
Probable Cause Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
Severity ERROR
FICN-1119
Message <timestamp>, [FICN-1119], <sequence-number>,, ERROR, <system-name>,
HostPrintIng:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the number of
seconds since the last IO started for this device>.<the number of milliseconds
since the last IO started for this device> seconds.
Probable Cause Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
Severity ERROR