Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

320 Fabric OS Message Reference
53-1002448-01
FICN-2085
38
Recommended
Action
This may be an unexpected event, contact your vendor's customer support for assistance.
Severity WARNING
FICN-2085
Message <timestamp>, [FICN-2085], <sequence-number>,, INFO, <system-name>, FICON or FCP
Emulation Enabled FCIP Tunnel is Up on VEPort=<VEPortNumber>.
Probable Cause Indicates a FICON or FCP Emulation Enabled FCIP tunnel has been established successfully to the
peer switch.
Recommended
Action
No action is required.
Severity INFO
FICN-2086
Message <timestamp>, [FICN-2086], <sequence-number>,, ERROR, <system-name>, FICON or FCP
Emulation Enabled FCIP Tunnel is Up on VEPort=<VEPortNumber>.
Probable Cause Indicates a FICON or FCP Emulation Enabled FCIP tunnel to the peer switch has been terminated.
Recommended
Action
This is an unexpected event, contact your vendor's customer support for assistance.
Severity ERROR
FICN-2087
Message <timestamp>, [FICN-2087], <sequence-number>,, ERROR, <system-name>, FICON
connected 3900 printer discovered Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>-invalid compression mode.
Probable Cause Indicates that FICON Printer emulation is enabled, but cannot be performed for this device due to
the fact that the compression mode on the tunnel is not NONE or Aggressive.
Recommended
Action
If you desire FICON Printer Emulation for this device, modify the tunnel compression mode to None
(mode 0) or Aggressive (mode 3).
Severity ERROR