Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 321
53-1002448-01
Chapter
39
FICU System Messages
FICU-1001
Message <timestamp>, [FICU-1001], <sequence-number>,, ERROR, <system-name>, <function
name>: config<config Set(key)|Get(key)| Save> failed rc = <error>.
Probable Cause Indicates that one of the configuration management functions have failed. The key variable is a
part of the Fabric OS configuration database and is for support use only. The error variable is an
internal error number.
Recommended
Action
Execute the haFailover command on the switch if it has redundant control processors (CPs) or
restart the switch. Execute the switchStatusShow command to check if your flash is full. If the flash
is full, execute the supportSave command to clear the core files.
Severity ERROR
FICU-1002
Message <timestamp>, [FICU-1002], <sequence-number>,, ERROR, <system-name>, <function
name>: Failed to get RNID from Management Server: Domain=<domain>, rc=<error>.
Probable Cause Indicates that the Fibre Connectivity Control Unit Port (FICON-CUP) daemon failed to get the switch
request node ID (RNID) from the management server because of a Fabric OS problem. The domain
variable displays the domain ID of the target switch for this RNID. The error variable is an internal
error number.
Recommended
Action
For bladed switch, execute the haFailover command. If the problem persists, or for a nonbladed
switch, download a new firmware using the firmwareDownload command.
Severity ERROR
FICU-1003
Message <timestamp>, [FICU-1003], <sequence-number>,, WARNING, <system-name>, <function
name>: <message> FICON-CUP License Not Installed: (<error>).
Probable Cause Indicates that the FICON-CUP license is not installed on the switch.
Recommended
Action
Execute the licenseShow command to check the installed licenses on the switch. The switch
cannot be managed using FICON-CUP commands until the FICON-CUP license is installed. Contact
your switch supplier for a FICON-CUP license. Execute the licenseAdd command to add the license
to your switch.
Severity WARNING