Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

322 Fabric OS Message Reference
53-1002448-01
FICU-1004
39
FICU-1004
Message <timestamp>, [FICU-1004], <sequence-number>,, WARNING, <system-name>, <function
name>: Failed to set fabric manager server (FMS) mode: conflicting PID
Format:<pid_format>, FMS Mode:<mode>.
Probable Cause Indicates that a process ID (PID) format conflict was encountered. The core PID format is required
for FICON-CUP.
The pid_format variable displays the PID format currently running on the fabric, and is one of the
following:
• 0 – VC-encoded PID format
• 1 – core PID format
• 2 – extended-edge PID format
The mode variable displays whether FICON Management Server (FMS) mode is enabled, and is one
of the following:
• 0 – FMS is enabled
• 1 – FMS is disabled
Recommended
Action
To enable FMS mode, the core PID format must be used in the fabric. Change the PID format to
core PID using the configure command and then re-enable FMS mode using the ficonCupSet
command.
Severity WARNING
FICU-1005
Message <timestamp>, [FICU-1005], <sequence-number>,, ERROR, <system-name>, Failed to
initialize <module>, rc = <error>.
Probable Cause Indicates that the initialization of the specified module within the FICON-CUP daemon failed.
Recommended
Action
Download a new firmware using the firmwareDownload command.
Severity ERROR
FICU-1006
Message <timestamp>, [FICU-1006], <sequence-number>,, WARNING, <system-name>, Control
Device Allegiance Reset: (Logical Path: 0x<PID>:0x<channel image ID>).
Probable Cause Indicates that the logical path with the specified PID and channel image ID lost allegiance to a
FICON-CUP device.
Recommended
Action
Check if the FICON channel corresponding to the PID in the message is functioning properly.
Severity WARNING