Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

332 Fabric OS Message Reference
53-1002448-01
FSPF-1005
42
FSPF-1005
Message <timestamp>, [FSPF-1005], <sequence-number>,, ERROR, <system-name>, Wrong Section
Id <section number>, should be <section number>, input port = <port number>
Probable Cause Indicates that an incorrect section ID was reported from the specified input port. The section ID is
used to identify a set of switches that share an identical topology database. The section ID is
implemented inside the protocol. The error message itself will indicate the mismatched section ID.
It should be set to 0 for a non-hierarchical fabric. SilkWorm switches support only section ID 0.
Recommended
Action
Use a frame analyzer to verify that the reported section ID is 0. Any connected switch from another
manufacturer with a section ID other than 0 is incompatible in a fabric of SilkWorm switches.
Disconnect the offending switch.
Severity ERROR
FSPF-1006
Message <timestamp>, [FSPF-1006], <sequence-number>,, ERROR, <system-name>, FSPF Version
<FSFP version> not supported, input port = <port number>
Probable Cause Indicates that the FSPF version is not supported on the specified input port.
Recommended
Action
Update the FSPF version by running the firmwareDownload command to update the firmware to the
latest version. All current versions of the Fabric OS support FSPF version 2.
Severity ERROR
FSPF-1007
Message <timestamp>, [FSPF-1007], <sequence-number>,, ERROR, <system-name>, ICL
triangular topology is broken between the neighboring domains: <domain number> and
<domain number>. Please fix it ASAP.
Probable Cause Indicates that the ICL triangular topology is broken and becomes linear. It may cause the frame
drop or performance slowdown.
Recommended
Action
Connect the two domains using ICL or regular ISL to form a triangular topology.
Severity ERROR
FSPF-1008
Message <timestamp>, [FSPF-1008], <sequence-number>,, INFO, <system-name>, ICL triangular
topology is formed among the domains: <domain number> (self), <domain number> and
<domain number>.
Probable Cause Indicates that the Inter-Chassis Link (ICL) triangular topology is formed.