Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 357
53-1002448-01
FW-1132
45
FW-1132
Message <timestamp>, [FW-1132], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of zone changes has changed from a value outside of the acceptable
range to a value within the acceptable range. Zone changes occur when there is a change to the
effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1133
Message <timestamp>, [FW-1133], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of fabric logins has changed. Fabric logins occur when a port or device
initializes with the fabric. The event is called fabric login (FLOGI).
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1134
Message <timestamp>, [FW-1134], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric logins has fallen below the low boundary. Fabric logins occur
when a port or device initializes with the fabric. The event is called fabric login (FLOGI). A low
number of fabric logins means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO