Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

362 Fabric OS Message Reference
53-1002448-01
FW-1166
45
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1166
Message <timestamp>, [FW-1166], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of synchronization losses that the port experiences has risen above the
high boundary. Loss-of-synchronization errors frequently occur due to a faulty small form-factor
pluggable (SFP) or cable. Signal losses often create synchronization losses.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and small form-factor pluggables
(SFPs) are not faulty.
If you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor
(HBA) and contact your switch service provider.
Severity WARNING
FW-1167
Message <timestamp>, [FW-1167], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause Indicates that the number of synchronization losses that the port experiences has changed from a
value outside of the acceptable range to a value within the acceptable range. Loss of
synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable.
Signal losses often create synchronization losses.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1168
Message <timestamp>, [FW-1168], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the number of signal losses that the port experiences has changed. Loss of signal
generally indicates a physical problem.