Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

366 Fabric OS Message Reference
53-1002448-01
FW-1178
45
FW-1178
Message <timestamp>, [FW-1178], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of invalid words that the port experiences has risen above the high
boundary. Invalid words usually indicate a hardware problem with an small form-factor pluggable
(SFP) or cable.
Recommended
Action
Verify that both ends of the connections, that SFP, and the cable are not faulty.
Severity WARNING
FW-1179
Message <timestamp>, [FW-1179], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause Indicates that the number of invalid words that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. Invalid words usually
indicate a hardware problem with an small form-factor pluggable (SFP) or cable.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1180
Message <timestamp>, [FW-1180], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRC) that the port experiences has
changed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check
your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that
all optical hardware is clean.
Severity INFO