Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 395
53-1002448-01
FW-1377
45
FW-1377
Message <timestamp>, [FW-1377], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of illegal commands has fallen below the low boundary. This counter
tracks how many times commands allowed only on the primary fabric configuration server (FCS)
switch have been executed on a non-primary FCS switch. There are many commands that can be
executed only on the primary FCS switch as well as one security command that can be executed
only on a backup FCS switch. The counter increments every time someone issues one of these
commands on a switch where it is not allowed.
Recommended
Action
No action is required.
Severity INFO
FW-1378
Message <timestamp>, [FW-1378], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of illegal commands has risen above the high boundary. This counter
tracks how many times commands allowed only on the primary fabric configuration server (FCS)
switch have been executed on a non-primary FCS switch. There are many commands that can be
executed only on the primary FCS switch as well as one security command that can be executed
only on a backup FCS switch. The counter increments every time someone issues one of these
commands on a switch where it is not allowed.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator
for response strategies and policies.
Severity WARNING
FW-1379
Message <timestamp>, [FW-1379], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of illegal commands has changed from a value outside of the acceptable
range to a value within the acceptable range. This counter tracks how many times commands
allowed only on the primary fabric configuration server (FCS) switch have been executed on a
non-primary FCS switch. There are many commands that can be executed only on the primary FCS
switch as well as one security command that can be executed only on a backup FCS switch. The
counter increments every time someone issues one of these commands on a switch where it is not
allowed.