Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

402 Fabric OS Message Reference
53-1002448-01
FW-1435
45
FW-1435
Message <timestamp>, [FW-1435], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Flash: usage out of range.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the flash usage is
out of range. The policy was set using the switchStatusPolicySet command.
Recommended
Action
Execute the supportSave command to clear out the kernel flash.
Severity WARNING
FW-1436
Message <timestamp>, [FW-1436], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Marginal ports: <Number of marginal ports> marginal out
of <Total number of ports> ports:config(<Percentage configured> percent,<Actual
threshold limit>). (Port(s) <port list>).
Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of marginal
ports are greater than or equal to the policy set using the switchStatusPolicySet command. A port
is faulty when the port value for Link Loss, Synchronization Loss, Signal Loss, Invalid word, Protocol
error, CRC error, Port state change, or Buffer Limited Port is above the high boundary.
Recommended
Action
Replace the faulty or deteriorating small form-factor pluggable (SFP). Execute the fwportdetailshow
command to know the reason for marginal ports.
Severity WARNING
FW-1437
Message <timestamp>, [FW-1437], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Faulty ports: <Number of faulty ports> faulty out of
<Total number of ports> ports:config(<Percentage configured> percent,<Actual
threshold limit>). (Port(s) <port list>).
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty ports is greater than or equal to the policy set by the switchStatusPolicySet command. A port
is considered faulty due to hardware failure such as a faulty small form-factor pluggable (SFP) or
port.
Recommended
Action
Replace any faulty or deteriorating SFPs.
Severity WARNING