Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 403
53-1002448-01
FW-1438
45
FW-1438
Message <timestamp>, [FW-1438], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Missing SFPs: <Number of missing SFPs> missing out of
<Total number of SFPs> SFPs:config(<Percentage configured> percent,<Actual
threshold limit>). (Port(s) <port list>).
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
missing small form-factor pluggables (SFPs) is greater than or equal to the policy set by the
switchStatusPolicySet command.
Recommended
Action
Execute the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty
ports.
Severity WARNING
FW-1439
Message <timestamp>, [FW-1439], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Switch offline.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the switch is
offline.
Recommended
Action
Execute the switchEnable command.
Severity WARNING
FW-1440
Message <timestamp>, [FW-1440], <sequence-number>,, INFO, <system-name>, <FRU label>
state has changed to <FRU state>.
Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to absent.
Recommended
Action
Verify that the event was planned.
Severity INFO
FW-1441
Message <timestamp>, [FW-1441], <sequence-number>,, INFO, <system-name>, <FRU label>
state has changed to <FRU state>.
Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to inserted. This
means that an FRU is inserted but not powered on.