Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

406 Fabric OS Message Reference
53-1002448-01
FW-1448
45
FW-1448
Message <timestamp>, [FW-1448], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Error ports: <Number of Error ports> Error out of
<Total number of ports> ports:config(<Percentage configured> percent,<actual
threshold limit>). (Port(s) <port list>).
Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of faulty ports
are greater than or equal to the policy set by the switchStatusPolicySet command. A port is faulted
because of port segmentation or port disable.
Recommended
Action
Execute the switchShow command to know the reason for port segmentation and port disable.
Take necessary action to bring the port up.
Severity WARNING
FW-1500
Message <timestamp>, [FW-1500], <sequence-number>,, WARNING, <system-name>, Mail overflow
- Alerts being discarded.
Probable Cause Indicates that mail alert overflow condition has occurred.
Recommended
Action
Resolve or disable the mail alert using the fwMailCfg command.
Severity WARNING
FW-1501
Message <timestamp>, [FW-1501], <sequence-number>,, INFO, <system-name>, Mail overflow
cleared - <Mails discarded> alerts discarded.
Probable Cause Indicates that the mail overflow condition has cleared.
Recommended
Action
No action is required.
Severity INFO
FW-1502
Message <timestamp>, [FW-1502], <sequence-number>,, WARNING, <system-name>, Invalid Email
address <Invalid address> is configured from pre-Matador config file.
Probable Cause Indicates that the configuration file has invalid e-mail addresses.