Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

414 Fabric OS Message Reference
53-1002448-01
FW-1530
45
FW-1530
Message <timestamp>, [FW-1530], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of link resets that the port experiences has changed and dropped below
upper threshold boundary to a value within the acceptable range. Link resets occur due to link
timeout errors that indicate no frame activity at all. Both physical and hardware problems can
cause link resets to increase.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation.
Severity INFO
FW-1531
Message <timestamp>, [FW-1531], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has crossed lower threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of C3 transmit time out frames has crossed lower threshold boundary
and is in between low and high thresholds.
Recommended
Action
Check the target device; it could be slow.
Severity INFO
FW-1532
Message <timestamp>, [FW-1532], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of C3 transmit time out frames have dropped below upper threshold
boundary and is in between low and high thresholds.
Recommended
Action
Check the target device; it could be slow.
Severity INFO