Manualshelf

Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit
521522523524525526527528529530
442 Fabric OS Message Reference
53-1002448-01
HIL-1603
48
HIL-1603
Message <timestamp>, [HIL-1603], <sequence-number>, FFDC, CRITICAL, <system-name>,
<failure count> fans out of service. System is shutting down immediately.
Probable Cause Indicates that the total fan failure count is greater than or equal to two.
Recommended
Action
To avoid causing damage to the switch, the system shuts down automatically. To help prevent
future problems, make sure that all the fans are working properly.
Severity CRITICAL
HIL-1605
Message <timestamp>, [HIL-1605], <sequence-number>,, INFO, <system-name>, High
temperature (<measured temperature> C), fan speed increasing per environmental
specifications.
Probable Cause Indicates that temperatures in the system have risen above the threshold and that the fan speed is
being increased.
Recommended
Action
No action required.
Severity INFO
HIL-1610
Message <timestamp>, [HIL-1610], <sequence-number>,, WARNING, <system-name>, Fan/PS unit
<Combo fan/power supply unit number> not supplying power, fan speeds may not be
available. Please ensure that the unit has power and the switch is on.
Probable Cause Indicates that the power supply is not connected to a power source or it is not switched on or the
unit is faulty. Applicable only to Brocade 5100 and Brocade 6510.
Recommended
Action
Ensure that the power cord is connected to the unit with a valid power source and then switch on
the unit. If the problem persists, try reseating the unit. If the problem still persists replace the FRU.
Severity WARNING
HIL-1611
Message <timestamp>, [HIL-1611], <sequence-number>, FFDC, CRITICAL, <system-name>,
MISMATCH in PSU-FAN Air Flow direction. Replace PSU with fan air flows in same
direction. System will be shut down in 2 minutes.
Probable Cause Indicates that PSU FAN Air Flows are in reverse direction. Could heat up the system. Replace PSU
with airflow in same direction otherwise the system will shutdown. Applicable only to Brocade
6510.