Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

504 Fabric OS Message Reference

53-1002448-01

MFIC-1003

Message <timestamp>, [MFIC-1003], <sequence-number>,, WARNING, <system-name>, Effective

Insistent domain ID for the fabric changed from <state> to <state>.

Probable Cause Indicates that one or more switches joined the fabric with an insistent domain ID (IDID) mode

setting that is different from the current effective IDID mode for the fabric. This message also

occurs when the IDID for the fabric has been turned on or off. The possible values for the state

variable are On and Off.

Recommended

Action

IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured

with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is

for information purposes only and no action is required.

IDID mode can be set using the configure command or by selecting the Advanced Web Tools Switch

Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode check box. The switch must be

disabled to change the IDID mode.

Severity WARNING