Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

520 Fabric OS Message Reference
53-1002448-01
NBFS-1003
75
Recommended
Action
Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it
is FULL, then this message can safely be ignored. Otherwise, run the portDisable and portEnable
commands to refresh the port.
Severity ERROR
NBFS-1003
Message <timestamp>, [NBFS-1003], <sequence-number>,, WARNING, <system-name>, DB_XMIT_SET
flag not set in state <current state name>, input <state name>, port <portnumber>
Probable Cause Indicates the database transmit set flag was not set for the specified input state on the specified
port. Neighbor finite state machine (NBFSM) states are as follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
Recommended
Action
No action is required. The Fabric OS automatically recovers from this problem.
Severity WARNING