Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

538 Fabric OS Message Reference

53-1002448-01

PDM-1021

Message <timestamp>, [PDM-1021], <sequence-number>,, WARNING, <system-name>, Failed to

download area port map.

Probable Cause Indicates a system call failed.

Recommended

Action

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run the supportFtp command (as needed) to set up automatic FTP

transfers; then run the supportSave command and contact your switch service provider.

Severity WARNING

PDM-1022

Message <timestamp>, [PDM-1022], <sequence-number>,, WARNING, <system-name>, The switch

is configured only with IPv6.

Probable Cause Indicates that the parity data manager (PDM) cannot synchronize with its peer because the

firmware does not support IPv6.

Recommended

Action

Configure the local switch with IPv4 addresses.

Severity WARNING

PDM-1023

Message <timestamp>, [PDM-1023], <sequence-number>,, WARNING, <system-name>, IPv6 is

configured for Radius.

Probable Cause Indicates that the parity data manager (PDM) cannot synchronize with its peer because the Radius

server is configured for IPv6 addresses. IPv6 is not supported by older firmware.

Recommended

Action

Configure the Radius server with IPv4 addresses.

Severity WARNING

PDM-1024

Message <timestamp>, [PDM-1024], <sequence-number>,, WARNING, <system-name>, DNS is

configured for IPv6.

Probable Cause Indicates that the parity data manager (PDM) cannot synchronize with its peer because the domain

name service (DNS) is configured for IPv6. IPv6 is not supported by older firmware.