Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

544 Fabric OS Message Reference
53-1002448-01
PLAT-1003
81
Recommended
Action
Reboot the CP if it does not reboot itself. Reseat the CP if rebooting does not solve the problem. If
the problem still persists, then replace the CP.
Severity CRITICAL
PLAT-1003
Message <timestamp>, [PLAT-1003], <sequence-number>, FFDC, CRITICAL, <system-name>, <Info
message> Slot <Blade Slot number> C/BE: <Captured Command/Byte-Enables data>
ADBUS: <Captured AD bus data> misc_intr <Bridge reset interrupts>.
Probable Cause Indicates a PCI bus hang was detected.
Recommended
Action
The FRU must be replaced.
Severity CRITICAL
PLAT-1004
Message <timestamp>, [PLAT-1004], <sequence-number>, FFDC, CRITICAL, <system-name>,
Switch has older FPGA rev 0x<FPGA version already installed in HW>; please upgrade
to newer rev 0x<FPGA version which Fabric OS carries> via the fpga_update command.
Probable Cause Indicates Fabric OS has a newer FPGA version.
Recommended
Action
Upgrade FPGA to new version.
Severity CRITICAL