Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

578 Fabric OS Message Reference

53-1002448-01

SCN-1002

Message <timestamp>, [SCN-1002], <sequence-number>, FFDC, ERROR, <system-name>, SCN queue

overflow for process

<daemon name>.

Probable Cause Indicates that an attempt to write a State Change Notification (SCN) message to a specific queue

has failed because the SCN queue for the specified daemon name is full. This might be caused by

the daemon hanging or the system being busy.

The following are some of the valid values for the daemon name. Refer to the Fabric OS Message

Reference for complete list:

• fabricd

• asd

• evmd

• fcpd

• webd

• msd

• nsd

• psd

• snmpd

• zoned

• fspfd

• tsd

Recommended

Action

If this message is caused by the system being busy, the condition is temporary.

If this message is caused by a hung daemon, the software watchdog will cause the daemon to

dump the core and reboot the switch. In this case, run the supportSave command to send the core

files using FTP to a secure server location.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity ERROR