Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 593
53-1002448-01
SEC-1065
94
SEC-1065
Message <timestamp>, [SEC-1065], <sequence-number>,, ERROR, <system-name>, Invalid
character in list.
Probable Cause Indicates the input list has an invalid character.
Recommended
Action
Enter valid input.
Severity ERROR
SEC-1069
Message <timestamp>, [SEC-1069], <sequence-number>,, ERROR, <system-name>, Security
Database is corrupted.
Probable Cause Indicates the security database is corrupted for unknown reasons.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR
SEC-1071
Message <timestamp>, [SEC-1071], <sequence-number>,, ERROR, <system-name>, No new
security policy data to apply.
Probable Cause Indicates that no changes in the defined security policy database need to be activated at this time.
Recommended
Action
Verify that the security event was planned. First change some policy definitions, then run the
secPolicyActivate command to activate the policies.
Severity ERROR
SEC-1072
Message <timestamp>, [SEC-1072], <sequence-number>,, ERROR, <system-name>, <Policy type>
Policy List is Empty!
Probable Cause Indicates the specific policy type is empty. The security database is corrupted for unknown reasons.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR