Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

616 Fabric OS Message Reference
53-1002448-01
SEC-1171
94
SEC-1171
Message <timestamp>, [SEC-1171], <sequence-number>,, ERROR, <system-name>, Disabled
secure mode due to invalid security object.
Probable Cause Indicates the switch is segmented, and secure mode is disabled on the switch because there was
no license present or no public key infrastructure (PKI) objects.
Recommended
Action
Run the pkiShow command to determine whether all PKI objects exist. If they do not exist, run the
pkiCreate command to create them for the switch.
Run the licenseAdd command to install the required license key. Refer to your switch supplier to
obtain a license if you do not have one.
Severity ERROR
SEC-1172
Message <timestamp>, [SEC-1172], <sequence-number>,, ERROR, <system-name>, Failed to
identify role.
Probable Cause Indicates the switch is unable to determine its role (primary FCS or backup FCS) in the secure
fabric.
Recommended
Action
Verify all switches in the fabric are in time synchronization with the primary and that no external
entity is trying to access the fabric. When verification is complete, retry the operation.
Severity ERROR
SEC-1173
Message <timestamp>, [SEC-1173], <sequence-number>,, ERROR, <system-name>, Lost contact
with Primary FCS switch.
Probable Cause Indicates the switch has lost contact with the primary fabric configuration server (FCS) switch in the
secure fabric. This could be due to the primary FCS being disabled.
Recommended
Action
If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS.
Severity ERROR
SEC-1174
Message <timestamp>, [SEC-1174], <sequence-number>,, ERROR, <system-name>, Failed to set
<FCS or non-FCS> password.
Probable Cause Indicates the fabric configuration server (FCS) or non-FCS password could not be set.