Manualshelf

Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit
701702703704705706707708709710
622 Fabric OS Message Reference
53-1002448-01
SEC-1194
94
SEC-1194
Message <timestamp>, [SEC-1194], <sequence-number>,, WARNING, <system-name>, This switch
does not have all the required PKI objects correctly installed.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity WARNING
SEC-1195
Message <timestamp>, [SEC-1195], <sequence-number>,, WARNING, <system-name>, This switch
has no <component> license.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity WARNING
SEC-1196
Message <timestamp>, [SEC-1196], <sequence-number>,, WARNING, <system-name>, Switch does
not have all default account names.
Probable Cause Indicates the default switch accounts admin and user do not exist on the switch when enabling
security.
Recommended
Action
Reset the default admin and user account names on the switch that reported the warning and retry
enabling security.
Severity WARNING